Precautions for production of aerated block equipment
September 20, 2021
(1) The empty car shall be assembled on the kettle inlet track for trial operation, and the operation shall be stable.
(2) The bearing shall be cleaned and changed once every two months, and the lubricating grease shall be No. 1 colloidal graphite grease.
(3) There is also the maintenance of vulnerable parts of steam curing vehicle. If the vulnerable parts are damaged in production, they should be replaced at the first time!
The steam curing trolley is mainly composed of the following parts:
Frame: it is mainly composed of section steel, with good rigidity and simple structure. The upper part is equipped with a bottom plate guide device, which makes the bottom plate fast and convenient to place.
Wheel assembly: it is mainly composed of wheel, shaft and bearing. The surface of the wheel is quenched and durable. The internal structure is specially designed to ensure that the bearing can still roll sensitively and operate reliably after high-temperature and high-pressure steam curing in autoclave.
