The aerated concrete equipment shall be regularly inspected and repaired before fixed

The first is the maintenance of the raw material processing part of the aerated concrete equipment, which ensures the accuracy of the metering control system. Specific implementation method:

1、 the traditional symmetrical quantity system uses weight verification to check whether each unloading valve is well sealed. If the unloading height and the bulk density fluctuate abnormally, it shall be rechecked immediately to ensure that the proportion of aerated concrete is correct. At the same time, keep the control room and each weighing control system clean. The maintenance of aerated concrete equipment shall be carried out as planned to ensure the accuracy of metering control system.

2、 Maintenance of mixer in the pulping process: clean the mixer regularly. After the maintenance of the mixer, replace the worn mixing blades in time to ensure the integrity of the mixing paddle and accessories. Use a hybrid system. Normal to ensure the writing of the whole body.

3、 Check and repair the nursing room regularly before fixed stay, so that all indicators can meet the pre feeding requirements of aerated concrete body, and ensure the smooth progress of subsequent blank cutting and cooking process.

4、 Maintenance of cutting machine: transport the blank out of the pre protection room, and the cutting machine can cut as needed. The capping machine developed by the company has various shapes and accuracy, and can realize large size. Mechanized production scale. The working state of cutting machine directly affects the accuracy of cutting size and cutting effect. Therefore, the maintenance of cutting device, transmission device, wire positioning device and other equipment should be strengthened to find and correct the defects of the device.

5、 Smoothness of billet operation process and track maintenance: the high pressure strength of aerated concrete equipment body is very low. Therefore, it is necessary to ensure the stability of the transportation process in order to reduce the damage of the blank structure during transportation. So as to reduce the impact on product quality. Therefore, it is necessary to ensure that the track is stable and free of debris during transportation, and that the lifting equipment and steering equipment can operate smoothly, such as the maintenance and repair of slings, drive wheels, guide wheels and other equipment.