jaw crusher in AAC production
August 25, 2021
The jaw crusher is an important machine for the raw material preparation section.lt is mainly used to crush lime into powder for AAC production
1.Advanced processing technique and high-end material are adopted for this rock crusher.
2. The active jaw assembly is constructed by high-quality casting steel parts. The heavy-duty eccentric shaft is made of forging stock making the jaw crusher both reliable and durable
3. The bearing pedestal comes in a one-piece casting steel structure, matching the frame of the crusher completely. Thus the radial strength of the bearing pedestal can be greatly enhanced.
4.Finite element analysis technique is adopted to make the jaw crusher stronger
5.The crushing chamber comes in a symmetric V type structure,so the width of real feeding inlet is exactly identical to the nominal width.
6. A wedge block type outlet adjusting device is available. So the adjustment is much easier, safer and faster than that using traditional gasket
7.All the eccentric shafts we used in the jaw crusher are bigger and more durable than those used in other
products with similar specifications. The high loading capacity and labyrinth seal make service life of the bearing much longer.
1.The material in the deep crushing chamber can be completely crushed. The production capacity is very high
2.The reduction ratio is big, and the granule size is uniform
3.A gasket type adjusting device is available for the material outlet. This device is reliableconvenient.and has a wide adjusting arrange Thus the jaw crusher can be more flexibly controlled and meet more needs
4.The lubricating system of this crusher is safe and reliable. The components can be easily changed, while limited maintenance is needed
5 this crusher has a simpe structure the working perormance is relable and the operation cost is quite low
6. If you need your machine to be energy-saving. Our jaw crusher will be a great choice because it can save you15%~30% power comparing with normal crushers
7.The crushing process produces low noise and limited dust